|
|
NE-500 Programmable OEM Syringe Pump |
|
Model: NE-500 |
Price: $520 USD |
NE-500 does not come with a power supply. Please see OEM Starter Kit and OEM Net below. |
- Computer controllable: networkable up to 100 pumps
- Stand-alone operation: pre-program the pump with a dispensing program, then operate the pump from an attached Foot Switch, button, or I/O controller
- One-click program upload from "Pumping Program Generator" spreadsheet
- Add the OEM Starter Kit to run as a fully functional, stand-alone pump
|
|
Description:
|
|
Open chassis design easily mounts into your system |
|
- Infusion and withdrawal
- Fully programmable and automation capable
- Set a single pumping rate and/or dispensing volume
- Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, extra I/O expansion port, sound the buzzer
- Operates stand-alone or from a computer. Cables sold separately.
- RS-232 Computer interface. USB converter cable available.
- Network, control, and monitor up to 100 pumps with one computer
- TTL logic interface for digital control
- Available in High Pressure, Stall Detection & Long Chassis options.
- Motor stall detection available in NE-501 model ($575)
- Dispensing accuracy of ± 1%
- Unlimited lifetime technical support
- Two year warranty
|
Example Flow Rates: NE-500, NE-501, NE-500L & NE-501L
|
Syringe Size |
Maximum Rate |
Minimum Rate |
0.5 µL |
25.49 µL/hr |
0.001 µL/hr |
1 mL |
52.86 mL/hr | 0.727 µL/hr |
3 mL |
223.8 mL/hr | 3.076 µL/hr |
5 mL |
372.5 mL/hr | 5.119 µL/hr |
10 mL |
607.6 mL/hr | 8.349 µL/hr |
20 mL |
966.2 mL/hr | 13.28 µL/hr |
30 mL |
1260 mL/hr | 17.32 µL/hr |
60 mL |
2120 mL/hr | 29.1 µL/hr |
140 mL |
3470 mL/hr | 47.7 µL/hr |
|
|
Model |
Standard |
High Pressure |
Stall Detection |
Long Chassis |
Price |
NE-500 | X | | | | $520.00 |
NE-501 | X | | X | | $575.00 |
NE-510 | | X | | | $560.00 |
NE-511 | | X | X | | $615.00 |
NE-500L | X | | | X | $535.00 |
NE-501L | X | | X | X | $590.00 |
NE-510L | | X | | X | $575.00 |
NE-511L | | X | X | X | $630.00 |
|
High Pressure
The NE-500 produces about 15 lbs of linear force at top speed and about 35 lbs at slow speeds. 10 mL/hr is an example of
slow speed. The pressure that can be generated is relative to the syringe size. On a 60 mL syringe, this would roughly produce about 30 psi.
The higher pressure versions will approximately double the pumping force at the same speeds.
|
Example Flow Rates: NE-510, NE-511, NE-510L & NE-511L
|
Syringe Size |
Maximum Rate |
Minimum Rate |
0.5 µL |
91.83 µL/hr |
0.001 µL/hr |
1 mL |
190.4 mL/hr |
1.453 µL/hr |
3 mL |
806.1 mL/hr |
6.151 µL/hr |
5 mL |
1341 mL/hr |
10.24 µL/hr |
10 mL |
2188 mL/hr |
16.7 µL/hr |
20 mL |
3479 mL/hr |
26.55 µL/hr |
30 mL |
4539 mL/hr |
34.64 µL/hr |
60 mL |
7635 mL/hr |
58.3 µL/hr |
140 mL |
208.3 mL/min |
95.37 µL/hr |
|
Stall Detection OptionAdds an optical encoder that will detect and stop the motor during a stall. Typically used in high pressure applications where there is a risk of exceeding the maximum force specified or the pump runs past the end of the syringe. Without the optical encoder, the pump will continue to cog in the event of a stall. Not to be used as a normal means of stopping the pump. |
Long Chassis OptionWill hold and allow a 140 mL syringe to open to its full length. |
Bottom Cover OptionAdds an enclosure for the open chassis.
|
Model: OEM-BOTCOVER-ASSBLY |
Price: $25 USD |
Back to Top |
|
OEM Starter Kit |
|
Model: OEM-USB-START | Price: $42.50 US, $42.50 UK $42.50 European, $42.50 Australian |
Description:
|
USB to RS-232 Converter Cable |
Model: CBL-USB232 | Price: $12.50 |
Description:
- Adds an RS-232 port to a computer by attaching to a USB port.
- Cable CBL-PC-PUMP-7 attaches between this cable and the pump.
|
OEM Net |
Back To Top |
|
Model: OEM-NET | Price: $15 US, $15 UK $15 European, $20 Australian |
Description:
Power supply and secondary cable only. For use when networking two or more OEM syringe pumps to a single computer serial port. Must use one OEM-NET for each additional OEM pump after the first pump. |
|
Foot Switch |
Back To Top |
|
Model: ADPT-FOOTSW-2 | Price: $35 USD |
Description:
- Remote and/or hands free pump operation
- Start, stop, or send a signal to a pumping program
- 15 different configurations. Change configuration within a pumping program
- Attach to any pump (except NE-300) for stand-alone operation
- 20 foot cable
- Attaches to the TTL logic port on pump
- Quick and simple setup
|
|
Firmware and Program Memory Upgrade Options:
|
|
Price: Add $75 USD to any OEM models |
Extra Features:
X upgrade adds Linear/Gradient flow rate ramping, additional advanced programming functions, additional I/O functions, expansion port, attach external switches,
sub program selection structure.
|
|
Price: Add $130 USD to any OEM models |
Extra Features:
X2 upgrade includes all features of the X model plus increases the number of programmable phases from 41 to 340. |
|
Back to Top |
|