NE-4500 Two Channel OEM Syringe Pump
|
 |
NE-4500 Two Channel OEM Syringe Pump |
 |
NE-500
OEM Syringe Pump |
 |
Custom Designed
OEM Syringe Pumps |
| NE-4500 Two Channel OEM Syringe Pump |
 |
Model: NE-4500 |
Price: $650 USD |
NE-4500 does not come with a power supply.
Please see OEM Starter Kit and OEM Net below. |
- Computer controllable: networkable up to 100 pumps
- Stand-alone operation: pre-program the pump with a dispensing program, then operate the pump from an
attached Foot Switch, button or I/O controller
- One-click program upload from "Pumping Program Generator" spreadsheet
- Add the OEM Starter Kit to run as a fully functional, stand-alone pump
|
Description:
|
- Infusion and withdrawal
- Fully programmable and automation capable
- Set a single pumping rate and/or dispensing volume
- Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, extra I/O expansion port, sound the buzzer
- Operates stand-alone or from a computer. Cables sold separately.
- RS-232 Computer interface. USB converter cable available.
- Network, control, and monitor up to 100 pumps with one computer
- TTL logic interface for digital control
- Available in Stall Detection and Long Chassis options.
- Worldwide power supplies available
- Motor stall detection available
- Dispensing accuracy of +/-1%
- Unlimited lifetime technical support
- Two year warranty
|
 |
Open chassis design easily mounts into your system. |
| Back to Top |
NE-4500L OEM Long Chassis
The NE-4500L includes a long chassis that will allow 140 mL syringes to open to their full length. |
Model: NE-4500L | Price: $665 USD |
NE-4501 OEM Syringe Pump with Stall Detection
The NE-4501 includes an optical encoder on the NE-4500 that will detect and stop the motor during a stall. Typically used in high pressure applications where there is a risk of exceeding the maximum force specified or the pump runs past the end of the syringe. Without the optical encoder, the pump will continue to cog in the event of a stall. Not to be used as a normal means of stopping the pump.
|
Model: NE-4501 | Price: $705 USD |
NE-4501L OEM Long Chassis with Stall Detection
The NE-4501L includes a long chassis that will allow 140 mL syringes to open to their full length. Includes stall detection. |
Model: NE-4501L | Price: $720 USD |
Bottom Cover OptionAdds an enclosure for the open chassis. Standard chassis only. |
Model: OEM-BOTCOVER-ASSBLY Price: $25 USD |
Example Flow Rates for the NE-4500: |
| Syringe Size |
Maximum Rate |
Minimum Rate |
| 0.5 µL | 90.39 µL/hr |
0.001 µL/hr |
| 1 mL | 187.4 mL/hr | 1.430 µL/hr |
| 3 mL | 793.4 mL/hr | 6.054 µL/hr |
| 5 mL | 1320 mL/hr | 10.08 µL/hr |
| 10 mL | 2153 mL/hr | 16.44 µL/hr |
| 20 mL | 3425 mL/hr | 26.14 µL/hr |
| 30 mL | 4468 mL/hr | 34.09 µL/hr |
| 60 mL | 7515 mL/hr | 57.34 µL/hr |
| 140 mL | 205 mL/min | 93.87 µL/hr |
|
|
|
| Back to Top |
|
OEM Starter Kit |
 |
Model: OEM-USB-START | Price: $42.50 US, $42.50 UK
$42.50 European, $42.50 Australian |
Description:
|
USB to RS-232 Converter Cable |
Model: CBL-USB232 | Price: $12.50 USD |
Description:
- Adds an RS-232 port to a computer by attaching to a USB port.
- Cable CBL-PC-PUMP-7 attaches between this cable and the pump.
|
OEM Net |
 |
Model: OEM-NET | Price: $15 US, $15 UK
$15 European, $20 Australian |
Description:
Power supply and secondary cable only. For use when networking two or more OEM syringe pumps to a single computer serial port.
Must use one OEM-NET for each additional OEM pump after the first pump. |
| Back to Top |
|
Foot Switch |
|
Model: ADPT-FOOTSW-2 | Price: $35 USD |
Description:
- Start, stop, or trigger the next phase on your syringe pump
- Attach to any pump (except NE-300) for stand-alone operation
- Attaches to the TTL logic port on syringe pump
- Quick and simple setup
|
|
Firmware and Program Memory Upgrade Options:
|
|
Price: Add $75 USD to any OEM models |
Extra Features:
X upgrade adds Linear/Gradient flow rate ramping, additional advanced programming functions, additional I/O functions, expansion port, attach external switches,
sub program selection structure.
|
|
Price: Add $130 USD to any OEM models |
Extra Features:
X2 upgrade includes all features of the X model plus increases the number of programmable phases from 41 to 340. |
|
| Back to Top |
|
|
