|
DUAL-NE-1000X
The Next Generation
Continuous Infusion Syringe Pump System
|
 |
Model: DUAL-1000X |
Price: $1910 USD |
Eliminates Flow Rate Pauses & Drop-Offs |
The DUAL-NE-1000X Continuous Pump System eliminates the problem of flow rate drop-offs and pauses found in "Push-Pull" syringe pump systems. With "Push-Pull" systems, one syringe infuses, while the other refills, then they switch directions. This switch of directions causes a delay in flow while the syringes are primed.
The DUAL-NE1000X Continuous Pump System solves the inconsistent flow rate problems of "push-pull" pumps.
How it works:
The refilling syringe pump fills the syringe at a faster rate than the infusing syringe pump infuses, giving it time to prime the syringe after the syringe is filled, or even overlap the infusion to create a seamless transition between syringes.
The smoothness of the transition between syringes can be fine tuned by adjusting the infusion rate, refill rate, priming rate, prime volume and overlap volume parameters.
|
Description:
Requirement:
Two Pumps from the NE-1000X Series of syringe pumps (any 2 NE-1000 Series of syringe pumps with an X upgrade in each pump). Pumps can be different models. One dual pump cable (Model: CBL-DUAL-3).
|
Features of the DUAL-NE-1000X:
- Includes: 2 NE-1000X programmable single syringe pumps, synchronization cable kit and two power supplies.
- Utilizes specialized dual pump synchronization cable kit to synchronize both pumps.
- Flexibility for the pumps to perform either continuous flow, emulsification or independently at any time.
- Built for automation
- Operates stand-alone or from a computer
- Infusion and withdrawal
- Set a single pumping rate and/or dispensing volume
- Applications range from simple infusions to complex pumping programs
- Programmable preset protocols
- Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer
- RS-232 and TTL logic control interfaces
- Network, control, and monitor up to 100 pumps with one computer.
- Gradient ramping of flow rates
- Worldwide power supplies available
- Motor stall detection
- Non-volatile memory of all parameters and programming
- Upgradable to 340 pumping phases program memory with the X2 Upgrade
- Dispensing accuracy of +/-1%
- Unlimited lifetime technical support
- Two year warranty
|
|
Example Flow Rates for the DUAL-NE-1000X: |
| Syringe Size |
Maximum Rate |
Minimum Rate |
| 0.5 µL |
25.49 µL/hr |
0.001 µL/hr |
| 1 mL |
52.86 mL/hr |
0.727 µL/hr |
| 3 mL |
223.8 mL/hr |
3.076 µL/hr |
| 5 mL |
372.5 mL/hr |
5.119 µL/hr |
| 10 mL |
607.6 mL/hr |
8.349 µL/hr |
| 20 mL |
966.2 mL/hr |
13.28 µL/hr |
| 30 mL |
1260 mL/hr |
17.32 µL/hr |
| 60 mL |
2120 mL/hr |
29.1 µL/hr |
| 140 mL |
3470 mL/hr |
47.7 µL/hr |
|
|
|
|
 |
Description:
- For use with our continuous infusion system or dual infusion system
- Provides a dual check valve for two syringes, withdraw will pull fluid from a reservoir and infusion will output into a separate line
- The kit is pre-assembled, all you need to do is plug in the syringes
- Each dual check valve uses 6" of 1/8" tubing to connect to a Y connector, one for reservior and one for output; each Y-connector has 5' of tubing to make connections to your application. Two 50 mL Norm-Ject® Luer Lock Inert syringes are included
- Individual parts are also available
|
Model: P-DKIT |
Price: $20.84 USD |
|
|
|
|
|
