Model: NE-4500

NE-4500 does not come with a power supply. Please see OEM Starter Kit and OEM Net below

• Does not have a built-in user interface
• Chassis mountable: 9 1/2"L x 4 1/4"W x 4 1/8"H (23.5 x 10.8 x 10.5 cm)
• Operates from a 12V DC power source
• Holds 2 syringe up to 60 cc, and partially filled 140cc
• Infusion rates from 0.73 µL/hr ( 1 cc syringe) to 2100 ml/hr (60 cc syringe)
• Includes all the advanced functions and programming features of the NE-1000 family
• Download free pump terminal emulator
• Custom modifications to the mechanics and firmware are available

• Built for Automation
• Operates from a computer
• Infusion and withdrawal
• Set a single pumping rate and/or dispensing volume
• Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer
• Network, control, and monitor up to 100 pumps with one computer
• Motor stall detection available in NE-501 model ($550)
• Dispensing accuracy of ± 1%
• Unlimited lifetime technical support
• Two year warranty

Example Flow Rates (NE-4500):
Syringe Size (cc) Maximum Rate (mL/hr) Minimum Rate (µL/hr) 0.5 µL 25.49 0.001 1 53.09 0.73 3 192.5 2.646 5 406.1 5.581 10 600 8.244 20 975.8 13.41 30 1282 17.63 60 2120 29.13	Need higher flow rates? Give us a call, we have other models available
Sample syringe configurations, can hold any size syringes below 60 cc.
NE-4500L OEM Extra Long Chassis back to top
The NE-4500L includes an extra long chassis on the NE-4500 that will hold and allow 140 ml syringe to open to its full length
Model: NE-4500L	Price: US $710
	Part ID: PUMP-NE4500L
NE-4501 OEM Syringe Pump with Stall Detection back to top
The NE-4501 includes an optical encoder on the NE-44500 that will detect and stop the motor during a stall. Typically used in high pressure applications where there is a risk of exceeding the maximum force specified. Without the optical encoder, the pump will continue to cog the event of a stall.
Model: NE-4501	Price: US $750
	Part ID: PUMP-NE4501
NE-4501L OEM Extra Long Chassis w/ stall detection back to top
The NE-4501L includes an extra long chassis on the NE-4501 that will hold and allow 140 ml syringe to open to its full length with stall detection
Model: NE-4501L	Price: US $765
	Part ID: PUMP-NE44501L

Example Flow Rates (NE-4500):
Syringe Size (cc) Maximum Rate (mL/hr) Minimum Rate (µL/hr) 0.5 µL 91.83 0.001 1 mL 191.2 1.459 3 693.4 5.291 5 1462 11.17 10 2160 16.49 20 3514 26.82 30 4619 35.25 60 7635 58.26	Need higher flow rates? Give us a call, we have other models available
Do you need an upgrade for your Syringe Pump?
Model: FW-5-X	Price: add US $55 to any OEM models
Extra Features: X upgrade is Linear/Gradient flow rate ramping, additional advanced programming possibilities, and additional i/o functions, expansion port, attach external switches, sub program selection structure, speed control switch
Model: FW-5-X2	Price: add US $110 to any OEM models
Extra Features: X2 upgrade includes all features of the X model plus increases the number of programmable phases from 41 to 340, and increases the max RS-232 baud rate to 38,400
OEM Starter Kit back to top
Description: Allows user to interactively communicate to the pump with a computer Includes: power supply, Pump-to-PC network cable (CBL-PC-PUMP-7), user manual
Part ID: OEM-STARTER	Price: US $25,UK $30,European $30, Australian $35
OEM-NET back to top
Power supply and secondary cable only. For use when networking two or more OEM NE-4500 syringe pumps together. Must use the secondary cable in order to complete this application.
Part ID: OEM-NET	Price: US $10,UK $15,European $15, Australian $20
Foot Switch back to top
Description: Start, stop, or trigger the next phase on your syringe pump Attach to an NE-4500 to allow stand-alone operation Utilizes the TTL logic port on syringe pump Quick and simple setup
Model: ADPT-2	Price: US $25
*** Not for clinical use on humans ***

About Us | Contact Us | ©2004 New Era Pump Systems, Inc. (631)249-1392